Payment & Shipping Terms:
|Material:||SS400/Q235B||Upright:||100 X 90 X 2.0 Mm|
|Pallet Rail:||2.5 Mm||Bracket:||4.0 Mm|
|Top Beam:||80 X 40 X 1.5 Mm RHS||Pitch Of Hole:||75 Mm|
|Suitable For Pallet:||W1000 X D1200||Name:||Drive In Pallet Racking|
drive in pallet rack system,
drive in drive through racking system
Heavy Duty Drive In and drive through pallet Racking for warehouse
Product introduction of Drive-in racking
Drive-in racking is also called corridor-type racking, composite structure, specialized high-intensity drive-in brackets, high-strength drive-in beam, frames are connected to top beams by bolts & nuts. The depth of the single side drive-in racking which is against the wall should not be more than 6 pallet locations, and that of double side drive-in should be less than 12 pallet positions so as to ensure the loading efficiency of forklifts and stability of racking. It’s best to make drive-in lower than H11000mm because of its not so good stability which is the weakest compared with other racking system. The drive-in racking should be equipped with back, top cross beams, etc. to stabilize the racks. This type of racking is densely arrayed, making full use of storage space; both “first in first out” and “first in late out” are available, suitable for storing few types of goods with large quantity. Widely used in milk, drink industry, and also be welcome by cold storage.
Drive-In Pallet Rack provide maximum storage capacity using the minimum amount of space. It is particularly suited to store very large quantities of homogeneous products.
Drive-In or Double Access Systems consist of continuous lanes of racking with only a single load and retrieval aisle. Loading and unloading is undertaken by means of counter balance or reach trucks that drive down each lane into the racks.
Drive-In rack operates on the system of First-In Last-Out (FILO), therefore it only suits products that is stored in sufficient volume to require multiples lanes to ensure stock rotation.
Product specification of the drive-in rack
|Racking Specs(LXW :mm)||Pallet Specs(LXW:mm)|
Product feature and application of the drive-in rack
※ High density storage - maximizing cubic space
※ More pallets stored per cubic meter than any other storage system
※ Limited stock rotation - particularly suitable for seasonal goods
※ Ideal for cold and chill storage applications
※ Accessible by the First-In, Last-Out principle
※ Used for bulk goods of the same type
Production details of the drive-in rack
|1||Upright||3||Connector||5||Odd bracket||7||Top tie|
|2||Track||4||Protector||6||Even bracket||8||Top beam|
Contact Person: Alex Qu